Canon PIXMA MX391 Driver & Manual

[Total: 0    Average: 0/5]

Canon PIXMA MX391 Driver, Wireless Setup for Windows, Mac OS X, and Linux Printer Download – The MX391 is an eligible product of home printer. Considering the need of simple document printing and colored document, this home printer engine performance is good enough. Equipped with low-middle engine spec, it cost less than an InkJet series. Although this is a printer made for basic usage, MX391 still has 4” x 6” Borderless photo.

ESAT ink cartridge can deliver printing speed up to 8,7 ipm of mono doc whereas the color printing speed can reach 5,0 ipm. It is true that the print speed it is just standard, but the Picoliter size is the same with MG series which is about 2- 5. Then, the paper size that is supported by Canon PIXMA MX391 covers 5 x 7, 8 x 10, Letter, Legal, and envelope. For the user with the small budget, this could be an alternative.

Such As Canon MG3160 Driver, The good news is that there is ADF feature in Canon PIXMA MX391. This automatic sheet feeder can help the user that is about to print a report or thesis with a lot of pages. With average capacity, the standard input tray can contain about 100 sheets. For the ADF max capacity, it is about 30 sheets. The document feeder is the best feature in this printer.

COMPATIBILITYSPECIFICATIONSINSTALLATION GUIDELINKS

Compatibility and System Requirements Canon MX391 Printer for Windows XP, Vista, Win 7, 8, 8.1 (64 Bit / x64 / 32 Bit / x86), Mac OS / OS X and Linux (32-Bit / 64-Bit).

  1. Prints Borderless 8.5 x 11″ Photos
  2. Color Scanning & Copying
  3. 802.11n Wi-Fi for Wireless Printing
  4. Super G3 High-Speed Fax
  5. 30-Sheet ADF
  6. Mac & Windows Compatibility
  7. Standard USB 2.0 Interface

Guidelines for Installation of Canon PIXMA MX391 Driver and Software

Of course, Before the printer can print documents or photos, You need to install the Canon MX391 driver on your PC or laptop. Below are the quick guide to installing the driver.

1. Canon PIXMA MX391 Installation Using Pre-downloaded Free Driver File

In this method, the presence of an installation CD for Canon MX 391 Printer is not necessary.

Required things:

  1. First, A file of driver setup for Canon PIXMA MX391, downloadable from the link below.
  2. A USB cable needed in establishing the connection between the PIXMA MX 391 printer and the computer.

Guidelines for installing Canon MX391 printer driver using a pre-downloaded setup file:

  1. Straightaway, You need to first turn on both your computer and printer.
  2. Do not connect your Canon MX391 printer and, your computer with the USB cable at this point. The system needs to specify that you have to plug in the MX391 cable before doing so.
  3. Then again, Download the Canon MX391 driver first if you have not previously. Install the MX391 driver on your computer. Each instruction is given on-screen needs to be followed correctly.
  4. Upon completion of Canon MX391 installation process, use the USB cable to connect your MX391 to your computer. The computer should begin detecting the MX391 printer on its own. Upon detecting, the Canon MX 391 installation wizard prompts more instructions for you to follow correctly.
  5. All PIXMA MX 391 instructions given are essential, thus follow correctly for proper installation.
  6. As a result, Your Canon MX391 is now good to run.
2. Manual Installation of Canon PIXMA MX391 Driver Printer

Accessing the computer’s operating system’s “Add a printer” option is needed, for this method.

Required things:

  1. Usually, A file of driver setup for Canon PIXMA MX391, downloadable from the link below.
  2. Overall, A USB cable needed in establishing the connection between the PIXMA MX391 printer and the computer, Locate in the package.

Guidelines for installing Canon PIXMA MX391 printer driver manually:

  1. The first step, You need to first turn on both your computer and MX391 printer.
  2. Connect your Canon MX391 to your computer right away. Use the USB cable that comes with the package.
  3. After that, The Canon PIXMA MX391 setup files within the zip folder need to be extracted first to a location of your own choice. The downloaded zip folder containing Canon MX 391 setup files typically is located on your computer’s TEMP folder.
  4. Indeed, Both Windows 7 and Windows Vista users can follow this step: Control Panel “View Devices & Printer”. Windows XP users: access Fax and Printers.
  5. Later, Select “Add a Canon MX391 printer” option.
  6. A new window should appear at this point. Feed it with the location where the extracted Canon PIXMA MX391 driver setup files are.
  7. Then, More instructions appear. Do as instructed correctly to complete the MX391 installation process.
  8. Upon completion, your PIXMA MX391 printer is now ready for use.
3. Installation of Canon PIXMA MX391 Using an Setup CD

Required things:

  1. In particular, A CD containing Canon MX391 setup files.
  2. Certainly, A USB to connect the unit to the computer, quickly take in the package.

Guidelines for installing PIXMA MX391 printer driver manually:

  1. In general, You need to first turn on both your computer and Canon MX 391 printer.
  2. Do not connect your PIXMA MX 391 printer and your computer with the USB cable at this point. The system needs to specify that you have to plug in the cable before doing so.
  3. Third, Insert the Canon PIXMA MX391 installation CD into the CD/DVD driver and run the MX 391 setup file by double-clicking on it.
  4. Later, Connect your computer to your Canon MX 391 with the USB cable. However, you need to make sure that the system has asked you to do so.
  5. Wait until the system builds a connection successfully. Next PIXMA MX391 driver Install, On-screen instructions will pop up and you have to follow them correctly.
  6. Last, When the installation is successful, the Canon MX 391 printer is up for you to use.
4. Canon MX391 Driver Installation For Mac OS Users

Guidelines for Installing Canon PIXMA MX391 Printer Driver and Software For Mac OS Users

  1. The presence a Canon MX391 installation file is essential. If you have not already, download the setup file first and remember where the downloaded files are stored on your Mac OS-based unit. You can try to look for the Canon PIXMA MX391 driver setup file in your unit’s computer settings.
  2. Locate the downloaded MX391 setup file. Double-click on it. Mount the file on the Disk Image.
  3. Surely, Locate the file mounted on the Disk Image. Double-click on it.
  4. Locate Canon PIXMA MX391 driver file. Double-click on it.
  5. Ultimately, Canon MX391 driver Installation starts automatically and immediately.
5. Canon PIXMA MX391 Installation For Linux Users

Required things:

  1. Particularly, A computer with Linux operating system installed.
  2. CUPS program. CUPS is short for Common Unix PIXMA MX391 Printer Software.

Guidelines for Installing Canon PIXMA MX391 Driver and Software—For Linux Users

  1. First, Turn the computer on. Run the CUPS.
  2. Head on to the computer’s web-based interface.
  3. Then, Run the browser. Open localhost: 631.
  4. Plug a USB cable into both the PIXMA MX391 driver printer and the computer.
  5. Look for the Administration tab on the browser. Choose the Administration tab. Choose Printers.
  6. Click on Add MX391 Printer.
  7. Feed your username and password.
  8. A list of printers will be displayed. Locate your Canon PIXMA MX391 on the list. Select it, followed by selecting Continue.
  9. The PIXMA MX391 printer will be detected and added by the CUPS program automatically.
  10. A window appears on the computer screen. You can configure settings on the Canon MX391 driver as you see fit on the window displayed. Input values as needed.
  11. Thus, The PIXMA MX391 printer is now up for you to use.
6. PIXMA MX391 Wireless Connection Setup Guides

(Note: this guide only works for Canon PIXMA MX391 Driver printers compatible with wireless connection)

Required things:

  1. Of course, A physical button of WPS connection should be present on the Canon PIXMA MX 391 printer.
  2. Additionally, A network, WPA or WPS-Secured system.

Guidelines for Setting up Canon PIXMA MX391 Wireless Connection

Step 1

  1. In the meantime, Locate the MX 391 printer’s WPS button and press it.

Step 2

  1. Specifically, Use the navigation arrows to select WLAN Setup icon.
  2. Then, Press the left function button of the Canon MX391 printer.

LED light indicator on the unit should turn on, signaling that it currently scans for a network secured with WPS.

Step 3

  1. Surely, Press the WPS button and hold it down for 5 seconds. Release the button afterward.
  2. Give it 2 minutes before pressing the OK button.
  3. Hence, You can press the OK button to complete Canon PIXMA MX391 setup.

The printer driver for Canon PIXMA MX391 should have already been installed on the computer.

2. Setting up Connection with Standard Method

Step 1

  1. First, Locate the Canon PIXMA MX391 printer’s WPS button and press it.

Step 2

  1. Then, Use the navigation arrows to select WLAN PIXMA MX391 installation icon.
  2. Next, Press the left function button of the Canon MX391 driver printer.

In addition, LED light indicator on the unit should turn on, signaling that it currently scans for a network secured with WPS.

Step 3

  1. At present, Locate the Stop/Reset button and press it.
  2. Second, Press the OK button to open Standard Canon PIXMA MX391 Driver setup. The unit will scan for an available network while the Canon MX 391 setup process commences.
  3. Use the navigation arrows to choose an access point that is available. Press the OK button. If the network you use is still not displayed, press the left function button once again to restart scanning.
  4. Further, press the OK button to enter the password. The PIXMA MX 391 Instructions to enter a password are as followed:
  5. Your password is case-sensitive. As such, you can rely on the Canon MX391 printer’s center function button. Press this button to move back and forth from numerical, lower case, and upper case modes.
  6. Later, With navigation arrows, pick a character as you like on the virtual keyboard. Press the OK button to confirm the selection. Press the OK button to pick another character.
  7. Once inputting your password completes, finish the Pixma MX 391 setup process by pressing the left function button.
  8. Complete the CANON MX391 setup process by pressing left function button. Press the OK button.
  9. Finally, The printer for Canon PIXMA MX391 driver should have already been installed on the computer.
7. Canon PIXMA MX391 Google Cloud Print Setup Guides

1. Use of Google Cloud Print Service on Printers that are not Cloud-ready

Required things:

  1. In general, Google Chrome installed on a computer that you want to setup PIXMA MX391 Printer.
  2. Certainly, A Canon PIXMA MX391 printer that is connected to the computer either via a USB cable or a local access network.

Step :

  1. At the present time, Activate the computer and access Google Chrome. If you have not already, on the Google Chrome browser, sign into your Google account.
  2. Find the menu button. It should be around the top right corner of the window.
  3. Then, Click on the Access Settings.
  4. Further, A window is displayed. Find “Show Advanced Settings” on the bottom and click on it.
  5. Find “Sign in to Google Print” button. Click on it.
  6. Quickly, Locate and click on the “Add MX 391 Printer” button.
  7. Locate and click on the “Manage Your MX391 Printers” option.
  8. Now, A new window is displayed. Locate “Printers” option to the left of the window. Click on it to draw forth a list of Canon PIXMA MX 391 printers connected to the computer.
  9. Ultimately, The Cannon MX 391 printer that you use will be the primary output point when you print through the Google Chrome.

2. Use of Google Cloud Print Service on MX391 Printers that are Cloud-ready

Required things:

  1. In particular, Google Chrome installed on a computer.
  2. Certainly, A cloud-ready for MX 391 Printer.

Step :

  1. First of all, Activate the computer and access Google Chrome.
  2. Afterward, Find the menu button. However, for Canon MX391 installation, It should be around the top right corner of the window.
  3. Access Settings.
  4. Later on, A window is displayed. Find “Show Advanced Settings” on the bottom and click on it.
  5. Find “Sign in to Google Print” button. Click on it. A link between your Google account and the Google Print service is now established.
  6. Thereafter, Locate and click on the “Add MX 391 Printer” button.
  7. Locate and click on the “Manage Your Printers” option.
  8. Then, A new window is displayed. Locate “Add a Cloud-ready Canon MX 391 Printer” option to the left of the window. Click on it to draw forth a list of the compatible manufacturer.
  9. At Last, Choose your MX391 printer model. Follow subsequent instructions correctly.

3. Using Google Print Service to Print

  1. The first step for Canon PIXMA MX391 Driver Setup, Activate the computer and access Google Chrome.
  2. Then, A drop-down menu appears. Navigate to and click on the “Print” option.
  3. Furthermore, Click the “Change…” button to determine the type of the MX391 printer you use. Find this button on the left side of the window, under the Destination tab.
  4. Select your Canon MX 391 printer.
  5. Click on “Print” button to begin with PIXMA MX391 printing.

Guidelines for Uninstallation of Canon PIXMA MX391 Driver Printer for Windows, Linux, and Mac Os X

1. Uninstall Driver for Windows

For Windows:

  1. Firstly, Locate the Windows button on your computer’s keyboard.
  2. Open the Control Panel tab.
  3. Then again, Look for the tab of Uninstall a Program. Select the tab.
  4. On the list displayed onscreen, find your Canon MX391 printer driver’s name.
  5. Don’t forget to Click on The PIXMA MX 391 Uninstall button.
  6. In summary, Give it a time to complete PIXMA MX 391 uninstallation.
2. Uninstall Driver for MAC OS

For Mac:

  1. Straightaway, Select Apple menu.
  2. Then, Select System Preferences.
  3. Forward for Canon MX391 driver Uninstall, Select Printers, and Scanners.
  4. Fourth, Look for and select MX 391 printer driver’s name on the list displayed onscreen.
  5. Last, Click the Remove button.
3. Uninstall Driver for Linux OS

For Linux:

  1. First, Run Application.
  2. Also, Select System Settings.
  3. Select Printers. A window displaying listed Canon PIXMA MX 391 printers appears.
  4. Presently, Find and select Unlock button. Locate the button at the top corner of the browser.
  5. Next, Enter your password.
  6. Of course, On the list displayed onscreen, choose your Canon PIXMA MX391 driver. A minus (-) sign should be near the name.
  7. As a result, Click on the minus sign.

Canon PIXMA MX391 Printer, Manual, Software, and Operation guide Download

Operating SystemVersionSizeDownload
PIXMA MX391 series CUPS Printer Driver (OS X 10.11 / 10.10 / 10.9 / 10.8 / X 10.711.7.1.015 MBDownload
ICA Driver (OS X 10.6)03.03.043.5 MBDownload
PIXMA MX391 series CUPS Printer Driver (OS X 10.6)11.7.1.016 MBDownload
PIXMA MX391 series Scanner Driver (OS X 10.11 / 10.10 / 10.9 / 10.8 / X 10.719.1.0a25 MBDownload
PIXMA MX391 series MP Drivers (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)01.0028 MBDownload
PIXMA MX391 series XPS Printer Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)0,25347222225 MBDownload
ScanGear MP for Linux (Source file)02.103.5 MBDownload
IJ Printer Driver for Linux (Source file)0,18756.5 MBDownload
PIXMA MX391 series IJ Printer Driver for Linux (debian Packagearchive)0,18753 MBDownload
PIXMA MX391 series IJ Printer Driver for Linux (rpm Packagearchive)0,18753 MBDownload
PIXMA MX391 series ScanGear MP for Linux (debian Packagearchive)02.101.3 MBDownload
PIXMA MX391 series ScanGear MP for Linux (rpm Packagearchive)02.101.3 MBDownload
ICA Driver (OS X 10.11 / 10.10 / 10.9 / 10.8 / X 10.704.00.002.4 MBDownload
Setup Manual For MacCA.1.001.9 MBDownload
Setup Manual For WindowsCA.1.002.1 MBDownload
Troubleshooting Manual For MacCA.1.001 MBDownload
Troubleshooting Manual For WindowsCA.1.001.1 MBDownload
Printing and Copying Manual For MacCA.1.001.3 MBDownload
Printing and Copying Manual For WindowsCA.1.001.9 MBDownload
Scanning Manual For MacCA.1.004 MBDownload
Scanning Manual For WindowsCA.1.003.1 MBDownload
PIXMA MX391 series (PDF) User Manual (Windows)01.018.8 MBDownload
Fax Manual For MacCA.1.00950 KBDownload
Fax Manual For WindowsCA.1.001020 KBDownload
Guide for Quick Menu (Mac)V2.61.1 MBDownload
Guide for Quick Menu (Windows)V2.61.1 MBDownload
Guide for My Image Garden (Windows)V3.211 MBDownload
Guide for My Image Garden (Mac)V3.211 MBDownload
PIXMA MX391 series Getting Started GuideV12.7 MBDownload
Setup Guide for Fax ReceptionV11.4 MBDownload
IJ Printer Driver Ver. 3.90 for Linux (Operation guide)0,187574 KBDownload
ScanGear MP Ver. 2.10 for Linux (Operation guide)02.10469 KBDownload

Canon PIXMA MX391 driverSelect your Canon PIXMA MX391 driver Printer below to access the latest downloads including full software, or user manual. Don’t Worry, The Download Links below for Canon MX 391 drivers Printer is active.

Download Canon MX391 Driver, Manual, and Software Here